Rolyan Ezeform (Anti-Microbial) Thermoplastic Splinting Material

Key Material Benefits

Ezeform is the only Rolyan splinting material with a high resistance to stretch and moderate conformability. This gives the clinician maximum control while stretching out the material while also needing less force during formation, helping them produce large and intricate splints.

Handling

Resistance to stretch: Maximum

Material does not stretch unless pushed or pulled in a direction and then held until cool. Unexpected patient movement will not cause the material to deform, and it will not stretch or deform when removed from splint bath.

Conformability: Moderate

Conforms to surface contours and detail when some force is applied. Moderate degree of drape.

Memory: Minimum

While it can be reheated and reshaped, the material will not return to its original shape.

Bonding: Uncoated

Create a permanent bond by pinching together heated surfaces.

Physical

Colors: White

Thickness: Assorted

Available in the following sheet thicknesses: 1/8″ (3.2 mm), 1/16″ (1.6 mm) and 3/32″ (2.4 mm).

Perforations : Assorted

Available in 1 percent, 19 percent or solid material.

Appearance: Opaque when heated

Hardened Splint

Rigidity: Moderate/Maximum (40.7 kpsi*)

Retains shape without reinforcement.

Surface: Smooth

No unwanted fingerprints or markings.

*Refers to Young’s Modulus testing value

Learn More about Rolyan Hand Therapy

WARNING: This product can expose you to chemicals including Cumene, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov