Rolyan Ezeform Thermoplastic Splinting Material

Key Material Benefits

Ezeform is the only Rolyan splinting material with a high resistance to stretch and moderate conformability. This gives the clinician maximum control while stretching out the material while also needing less force during formation, helping them produce large and intricate splints.

Handling

Resistance to stretch: Maximum

Material does not stretch unless pushed or pulled in a direction and then held until cool. Unexpected patient movement will not cause the material to deform, and it will not stretch or deform when removed from splint bath.

Conformability: Moderate

Conforms to surface contours and detail when some force is applied. Moderate degree of drape.

Memory: Minimum

While it can be reheated and reshaped, the material will not return to its original shape.

Bonding: Uncoated

Create a permanent bond by pinching together heated surfaces.

Physical

Colors: Assorted

Beige, charcoal, blue or white

Thickness: Assorted

Available in the following sheet thicknesses: 1/8″ (3.2 mm),
1/16″ (1.6 mm) and 3/32″ (2.4 mm).

Perforations : Assorted

Available in 1 percent, 19 percent or solid material.

Appearance: Opaque when heated

Hardened Splint

Rigidity: Moderate/Maximum (40.7 kpsi*)

Retains shape without reinforcement.

Surface: Smooth

No unwanted fingerprints and markings.

*Refers to Young’s Modulus testing value

Learn More about Rolyan Hand Therapy

Rolyan Ezeform Gives Clinicians Control

Ezeform is the only Rolyan splinting material with high resistance to stretch and moderate conformability. This gives the clinician maximum control when stretching out the material while also requiring less force during formation. Clinicians can produce medium or large intricate sheets that are perfect for hand splints, wrist splints, elbow splints, dynamic splints, pediatric splints, and more.

Custom Splint Molding

The clinician is in complete control with Rolyan Ezeform Thermoplastic Splint Material. With a maximum resistance to stretch, the material will not lose shape unless it is pushed or pulled in the desired direction and held until cool. That means unexpected patient movement will not cause the thermoplastic splint material to deform, and it will not stretch or deform when removed from a splint bath. When force is applied, the splinting material conforms to the surface contours and details. While it can be reheated and reshaped, the splint material will not return to its original shape.

Ezeform Splinting Material Properties

The Ezeform family of thermoplastic splint material is perfect for a variety of supportive needs. It is available in 1/8″ (3.2 mm), 1/16″ (1.6 mm) and 3/32″ (2.4 mm) sheet thicknesses with 1%, 19%, or solid perforation options. When the splint is hardened, it has a moderate/maximum rigidity of 40.7 kpsi* meaning it retains its shape without reinforcement.

*Refers to Young’s Modulus testing value

Learn More about Rolyan Hand Therapy

WARNING: This product can expose you to chemicals including Cumene, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov